Island Calypso Earrings

Step 1

I cut 6" of wire, I always cut it longer than needed. Slide the wire through the pendant hole, hold it down and bring it back up and through the hole again. Carefully nudge it through, you don't want to kink your wire.

Step 2

Don't go through the hole a third time keep the wire on the back side, twist the wires together once really tight.

Step 3

Now both wire are securely at the top slide the beads on in the order shown.

Step 4

Create a loop facing front using wire looping pliers and wrap the excess wire around the base of the loop a few times and trim.

See Tip: Wire Wrap a Bail on a Teardrop